PP/Nylon/PVDF/PTFE/Pes/Mce Membrane Capsule Filter for Ink Filtration

• Customization: Available
• Medium Material: Customized
• Filtration Grade: Medium Filter
• Model NO.: Capsule Filter
• Filter Media: PP/Nylon/PVDF/PTFE/Pes/Mce/GF
• Pore Size: 0.1/0.22/0.45/0.65/0.8/1.0/3.0/5.0um
• Connection: Inlet/Outlet:Tri-Clamp
• Filter Connector: 1/4"Mnpt
• Length: 2.5"/5"/10"
• Certification: ISO9001,SGS
• Application: Inkjet Ink,Solvents,Pigments Filtration
• Packing: Plastic Bag + Carton Packing
• Trademark: QingFeng, OEM
• Origin: China
• HS Code: 8421999000
• Production Capacity: 100000PCS/Year

Product Description

                                                                                       Capsule Filter

1.Small, light, and easy to connect
2.Economical to filter and less waste
3.Good compatibility, safe and economic to disposal
4.Minimal hold up volume of fluids ensures minimum wastage
5.No binders, glues or mold release agents are employed  
 
Specifications & Technical data:
Material of Construction
Medium: PTFE, PP, PVDF
Support & Housing: PP
Removal Rating: Please refer to Ordering Information as attached.
Configurations: Nominal Length: 2.5"/112mm; 5"/196mm
Diameter: ODΦ67
Fittings: Inlet/Outlet: 1/4"SW; Vent/ Drain: 1/4"SW
Effective Filter Areas: 2.5" ≥0.14m2
 
Sealing Quality:
Capsule filters are manufactured to a very high  standard of quality assurance and cleanliness. Manufactured in accordance to ISO 9001:2000
 
 Operating Conditions:
    • Maximum Temperature:140°F/60°C
   • Maximum Forward Differential Pressure :0.42Mpa
   • Maximum Reverse Differential Pressure :0.21Mpa
 
Typical Applications: 
1.Chemicals
2.Solvents
3.Coatings
4.Pigment
5.Oil
6.Photoresist
7.Small volume previous chemicals

Specification: 

Materials of Construction
Filter Media	PES/Nylon66/PTFE/PP/GF/PVDF
Support & Housing	PP
Sealing technology	Thermal Bonding, No Adhesives
Filtration Area, ft 2
≥ 2.2
Pore Size, μm
Please refer to Ordering Information.
Maximum Differential Pressure
Forward: 3.5 bar @ 23°C and 3.0 bar @ 60°C for liquid; 3.0 bar @ 23°Cand 2.5 bar @ 60°C for gas & air.
Sterilization
3 autoclave cycles of 30 min at 123 °C; steam-in-place sterilization not recommendable.
Good Manufacturing Practices
Manufactured in an ANOW facility which adheres to Good Manufacturing Practices.

Certificates: